| |
Ethernet I/O - EMF-EIO03
Network Sensor Interface
The EMF-EIO03 is a simple field I/O devices intended to interface
to motor controls and power equipment. Fully isolated I/O provides
the ability to interface to AC and DC circuits on the same module.
POE eliminates the need for an additional DC power supply in the
control cabinet.
I/O
The EMF-EIO03 industrial I/O device is designed to solve the most
demanding industrial monitoring and control requirements by
simple configuration, maximum throughput, and minimum
downtime.
The device features 8 optically isolated discrete inputs capable of
surviving severe input transients, and 4 mechanical relay contact
outputs.
Ethernet Network
Ports |
1 RJ45 |
PoE |
IEEE 802.3af, Legacy
PoE supported |
Over Current
Protection |
to 802.3af |
Port Isolation |
1200 V RMS, 1 minute |
Power
Input Voltage |
10-60 Vdc |
Power Required |
1.5 W |
I/O Specifications
Discrete In |
8 Channels |
Input Voltage
|
24 Vdc nom
120 Vac nom
240 Vac nom |
Discrete Out |
4 Channels |
Type
|
Form A (1 NC) |
Range
|
30 Vdc, 240 Vac |
Max Current
|
5 A dc, 10 A ac |
Physical Parameters
Dimensions |
4.25 x 2.75 x 2.25 “ |
Rating |
IP54 |
Mounting |
DIN Rail, 35 mm |
Housing |
Polycarbonate, UL94-V0 |
Operating Temp |
-40 to 85 deg C |
Storage Temp |
-40 to 85 deg C |
|
 Features
Industrial Hardware
- Industrial I/O with multiple input options
- Fully isolated inputs and outputs, optically isolated inputs,
mechanical relay contact outputs
- Small form factor eases installation
- Industrial rated -40 to +85 °C operation
- Standard DIN rail mounting
Control Network
- Modbus/TCP on Ethernet enables simple installation and
configuration
- Supports function codes 01, 02, 03, 04, 05 and 0F
- Configurable loss of communication output action
- Discovery tool eases initial setup
Power over Ethernet
- Receives power from 802.3af power sources, midspan
injectors and legacy PoE networks
Order Numbers
- EMF-EIO03-24 Nominal 24 V inputs
- EMF-EIO03-120 Nominal 120 V inputs
- EMF-EIO03-240 Nominal 240 V inputs
|
